My shopping cart
Your cart is currently empty.Continue Shopping
In this article we will show you step by step how you can make individual coasters, with our JDiction products. With these resin coasters you can conjure up a special home accessory or a gift for your loved ones in no time at all. What are you waiting for?
Have all the materials ready. Note that we recommend for your materials and workspace to be between 72-85°F.
Step 1: Mix our JDiction Epoxy Resin according to the instructions in a ratio of 1: 1 by volume. Stir well until no more streaks can be seen.
Step 2: For a transparent result, pour some resin just below the edge of the mold. Divide the remaining epoxy into different mixing containers. Mix the resin portions with color and add metallic pigments according to your wishes.
Tips: Please do not add more than 6% of the total combined volume of resin and hardener ( eg. 50ml resin + 50 ml hardener = 100 ml total would require no more than 6 ml of colorant. )
Step 3: After 24 hours the resin has hardened and you can take the pendant out of the mold (if using UV resin, have to cure with under the UV lamp or sunlight).
If you want, you can now set off the edges of the geodes with acrylic paint pens to finalize them.